Model NO.: GLB 28/40
Max Diameter: 90mm
Rotor: 1-3/16"
Upper Stator: 2-7/8
Lower Stator: 2-7/8"
Rod Rate: 60-150
Theoretical Dairy Flow: 4-9 M3/D
Sucker Rod: 7/8"
Head Lift: 1200-1600
Trademark: Baofeng
Transport Package: Standard Package
Specification: ISO API
Origin: Weifang China
Model NO.: GLB 28/40
Max Diameter: 90mm
Rotor: 1-3/16"
Upper Stator: 2-7/8
Lower Stator: 2-7/8"
Rod Rate: 60-150
Theoretical Dairy Flow: 4-9 M3/D
Sucker Rod: 7/8"
Head Lift: 1200-1600
Trademark: Baofeng
Transport Package: Standard Package
Specification: ISO API
Origin: Weifang China
Progressive Cavity PumpPC pump, this new production has been widely used in recent years in oil fields at home and abroad and plays an important role in crude oil fields. Our company has committed to research and development of screw pump and its accessories for many years. We already got more than 50 kinds of screw pumps, in displacement ranged from GLB20to GLB3000, and well depth over 2300m. There are single head PC pump for ordinary crude oil physical property, high temperature PC pump adapted to 170 degree and bimetal type for 350 degree, hollow rotor PC pump applied to heating pump and flushing, uniform thickness PC pump suitable for depth over 1800m or extraction needs of crude oil contained high hydrogen sulfide, high hydrocarbon, high gas physical properties and Special type for CBM drainage gas.
The PC pump can both adapt to low viscosity crude oil and to heavy oil, high freezing point oil, high wax content oil, high sand content oil and high gas content oil. It is irreplaceable with its high advantage to help to change dried-up well to living well.
For the use of PC pump, we have four driving head device for option, Belt Gear Reduction Transmission (horizontal), Gearless Transmission (vertical), Direct Drive Motor Gearing and Eccentric Test Gearing. According to the promotion recent years, it is a trend that the PC pump will replace the large heavy beam-pumping unit in shallow well and middle-deep well. It has advantage of one-time low investment, high oil production efficiency, low energy consumption, simple structure, and easy operation, installation, and maintenance. Along with the improvement of application technology and oil production equipment, PC Pump will be widely used in future.
PC Pump Setting Parameters
| Setting depth(m) | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 |
| Lifting distance (mm) | 550 | 650 | 750 | 850 | 950 | 1100 | 1200 | 1300 |
GLB series of PC Pump Parameters
|
Model |
Length (mm) |
Maxi. Diameter (mm) |
Rotor screw (in) |
Stator upper screw(in) |
Stator lower screw(in) |
Rod rate (rpm) |
Theoretical dairy flow(m3/d) |
Applicable tubing(in) |
Sucker rod(in) |
Head(m) |
| GLB\10/35 | 2940 | 90 | 15/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 1-4 | ≥73 | 7/8″ | 1000-1400           |
| GLB\28/40 | 3650 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 3-6 | ≥73 | 7/8″ | 1200-1600 |
| GLB\40/12 | 1550 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 600-800 |
| GLB\40/14 | 2200 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 400-600 |
| GLB\40/21 | 2330 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 700-1000 |
| GLB\40/42 | 4670 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 4-9 | ≥73 | 7/8″ | 1200-1800 |
| GLB\50/21 | 2380 | 90 | 1-3/16″ | 2-7/8″ | 2-7/8″ | 60-150 | 5-10 | ≥73 | 7/8″ | 700-1000 |
| GLB\75/14 | 2140 | 90 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 7/8″ | 400-600 |
| GLB\75/21 | 2200 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 1″ | 700-1000 |
| GLB\75/40 | 4410 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 6-15 | ≥73 | 1″ | 1200-1600 |
| GLB\120/18 | 3000 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 500-800 |
| GLB\120/21 | 2932 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 700-1000 |
| GLB\120/27 | 4428 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 800-1000 |
| GLB\120/36 | 5865 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 1100-1400 |
| GLB\120/40 | 5900 | 108 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 10-25 | ≥73 | 1″ | 1200-1600 |
| GLB\165/35 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 14-36 | ≥73 | 1″ | 900-1300 |
| GLB\190/33 | 5650 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 15-40 | ≥73 | 1″ | 900-1300 |
| GLB\200/27 | 5650 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 17-42 | ≥73 | 1″ | 800-1000 |
| GLB\300/21 | 4850 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥73 | 1″ | 700-1000 |
| GLB\300/26 | 6000 | 114 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 1″ | 700-1000 |
| GLB\300/33 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 25-60 | ≥88.9 | 1″ | 800-1200 |
| GLB\420/20 | 4820 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 35-70 | ≥88.9 | 1″ | 700-1000 |
| GLB\500/14 | 3380 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 1″ | 600-800 |
| GLB\500/21 | 5060 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 40-80 | ≥88.9 | 1″ | 700-1000 |
| GLB\600/18 | 7122 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 85-130 | ≥88.9 | 1″ | 500-900 |
| GLB\230/2-30 | 6200 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 20-50 | ≥88.9 | 1″ | 900-1200 |
| GLB\450/2-24 | 6520 | 117 | 1-3/8″ | 3-1/2″ | 2-7/8″ | 60-150 | 39-97 | ≥88.9 | 1″ | 700-1000 |
| GLB\800/2-16 | 5020 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 70-173 | ≥88.9 | KG36″ | 500-700 |
| GLB\800/2-24 | 7120 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 70-173 | ≥88.9 | KG36″ | 700-900 |
| GLB\1200/2-16 | 6640 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 103-260 | ≥88.9 | KG36″ | 600-800 |
| GLB\1400/2-16 | 7420 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 120-302 | ≥88.9 | KG36″ | 600-800 |
| GLB\1600/2-14 | 7420 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 138-345 | ≥88.9 | KG36″ | 500-700 |
| GLB\1800/2-14 | 7470 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 155-388 | ≥88.9 | KG36″ | 500-700 |
| GLB\2500/2-8 | 7470 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 216-540 | ≥88.9 | KG36″ | 400-600 |
| GLB\3000/2-8 | 7680 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | 60-150 | 260-648 | ≥88.9 | KG36″ | 400-600 |
| GLB\4000/2-6 | 7680 | 117 | 1-9/16″ | 3-1/2″ | 2-7/8″ | Trapezoidal Oblique Plate Slitting Machine is also named as: Trapezoidal Oblique Plate Shearing Machine,Trapezoidal Oblique Plate Cutting Machine,Trapezoidal Oblique Plate Trimming Machine,Sector Plate Shearing Machine,Tapered Street Pole Metal Plate Slitting Machine. This type machine is mainly used to cut steel plates into trapezoidal or fan-shaped shapes. Trapezoidal Oblique Plate Slitting Machine,Trapezoidal Oblique Plate Shearing Machine,Trapezoidal Oblique Plate Cutting Machine,Trapezoidal Oblique Plate Trimming Machine,Sector Plate Shearing Machine,Fan-shaped Plate Cutting Machine Wuxi Zhouxiang Complete Set of Welding Equipment Co., Ltd. , https://www.beamweldingmachine.com |