Introduction of magnetic separator
 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.
The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.
The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.
Classification of magnetic separator
Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system
Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.
Discharging Type of magnetic separator
Manual Discharge Type (without motor and belt)
Self-Discharging Type (with motor and belt)
Cooling Type: (just for electromagnetic type)
--Air CoolingÂ
--Oil Cooling
--Fan Cooling
Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.
Features of magnetic separation equipment
1. Excellent magnetic field intensity, Used to remove iron particles from material2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.
Application of belt electromagnetic separation
widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.Components of magnetic separator
Permanent magnetic plate, Belt , Motor, Iron frame.
Sketch installation drawing of magnetic separator
Technical Data of  magnetic separator
Model No. |
Adaptive belt width |
Suspension height |
Magnetic intensity |
Thickness of materials |
Motor power |
Adaptive belt speed |
Duty type |
Weight |
Outline dimensions (mm) |
||||
A |
B |
C |
D |
E |
|||||||||
RCYD(C)-5 |
500 |
150 |
320 |
80 |
1.5 |
4.5 |
continuous |
450 |
1900 |
710 |
935 |
950 |
753 |
RCYD(C)-6 |
600 |
175 |
320 |
120 |
1.5 |
620 |
2050 |
710 |
1020 |
1050 |
753 |
||
RCYD(C)-6.5 |
650 |
200 |
320 |
150 |
1.5 |
900 |
2050 |
728 |
1020 |
1200 |
888 |
||
RCYD(C)-8 |
800 |
250 |
320 |
200 |
2.2 |
1100 |
2250 |
750 |
1300 |
1350 |
1090 |
||
RCYD(C)-10 |
1000 |
300 |
320 |
250 |
3.0 |
1820 |
2650 |
889 |
1550 |
1450 |
1335 |
||
RCYD(C)-12 |
1200 |
350 |
320 |
300 |
4.0 |
3050 |
2860 |
1010 |
1720 |
1550 |
1515 |
||
RCYD(C)-14 |
1400 |
400 |
320 |
350 |
4.0 |
4150 |
3225 |
1050 |
1980 |
1800 |
1755 |
||
RCYD(C)-16 |
1600 |
450 |
320 |
400 |
5.5 |
5900 |
3350 |
1180 |
2160 |
1950 |
1850 |
||
RCYD(C)-18 |
1800 |
500 |
350 |
450 |
5.5 |
7800 |
3580 |
1210 |
2450 |
2200 |
2130 |
||
RCYD(C)-20 |
2000 |
550 |
350 |
500 |
7.5 |
9400 |
3800 |
1300 |
2700 |
2400 |
2410 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact Information
Introduction of magnetic separator
 Magnetic separation is a continuous process by which magnetic material is separated from non-magnetic material. The mixture of magnetic and non-magnetic material is passed through a strong magnetic field. Magnetic material is magnetized and gets attracted to the surface of the separator and is discharged in a chute.
The efficiency of the separator depends upon the strength of the magnet and the speed of the conveyor. The length of the magnet is designed such that the magnetic material is in the magnetic field for a period of 0.4 to 0.5 secs. Strontium Ferrite permanent blocks are used in the magnet assembly to achieve a surface gauss of 2500.
The gap between the magnet and the conveyor is adjustable. Lower the gap, better the separation efficiency. Individual drive is used for the separator and the conveyor. Adjustable stainless steel splitters are provided between the two chutes. Vibrating feeder with two unbalance motor is also provided, which ensures that the material spreads across the belt to achieve better separation. We can supply belt type separators for a belt width of 650 mm to 2000 mm.
Classification of magnetic separator
Electromagnetic Type (with control panel):adopts rare earth magnet and ferrite magnet to form its permanent magnetic system
Permanent Type (without control panel): adopts excitation coils to form its electromagnetic system. magnetic separator is usually used in continuous duty occasions with plenty of iron materials.
Discharging Type of magnetic separator
Manual Discharge Type (without motor and belt)
Self-Discharging Type (with motor and belt)
Cooling Type: (just for electromagnetic type)
--Air CoolingÂ
--Oil Cooling
--Fan Cooling
Operating Principle
The magnetic & nonmagnetic material is passed under the Magnetic Separator by a conveyor. The mixture is fed on to the conveyor evenly by the help of a feeder. Under the influence of the magnetic field the magnetic material is attracted upwards, towards the magnet face. The attracted material is carried along the cleated belt of the Separator and is continuously discharged in the magnet chute. The other material with is carried by the bottom conveyor and discharged in the non mag chute.
Features of magnetic separation equipment
1. Excellent magnetic field intensity, Used to remove iron particles from material2. The wholly sealed structure makes the remover water-proof, dust-proof and corrosion resisting.
3. Low energy consumption.
Application of belt electromagnetic separation
widely used in mining ore, limestone, hard coke, cement, chemicals, plastics, coal, refractory , building materials, food and other industries.Components of magnetic separator
Permanent magnetic plate, Belt , Motor, Iron frame.
Sketch installation drawing of magnetic separator
Technical Data of  magnetic separator
Model No. |
Adaptive belt width |
Suspension height |
Magnetic intensity |
Thickness of materials |
Motor power |
Adaptive belt speed |
Duty type |
Weight |
Outline dimensions (mm) |
||||
A |
B |
C |
D |
E |
|||||||||
RCYD(C)-5 |
500 |
150 |
320 |
80 |
1.5 |
4.5 |
continuous |
450 |
1900 |
710 |
935 |
950 |
753 |
RCYD(C)-6 |
600 |
175 |
320 |
120 |
1.5 |
620 |
2050 |
710 |
1020 |
1050 |
753 |
||
RCYD(C)-6.5 |
650 |
200 |
320 |
150 |
1.5 |
900 |
2050 |
728 |
1020 |
1200 |
888 |
||
RCYD(C)-8 |
800 |
250 |
320 |
200 |
2.2 |
1100 |
2250 |
750 |
1300 |
1350 |
1090 |
||
RCYD(C)-10 |
1000 |
300 |
320 |
250 |
3.0 |
1820 |
2650 |
889 |
1550 |
1450 |
1335 |
||
RCYD(C)-12 |
1200 |
350 |
320 |
300 |
4.0 |
3050 |
2860 |
1010 |
1720 |
1550 |
1515 |
||
RCYD(C)-14 |
1400 |
400 |
320 |
350 |
4.0 |
4150 |
3225 |
1050 |
1980 |
1800 |
1755 |
||
RCYD(C)-16 |
1600 |
450 |
320 |
400 |
5.5 |
5900 |
3350 |
1180 |
2160 |
1950 |
1850 |
||
RCYD(C)-18 |
1800 |
500 |
350 |
450 |
5.5 |
7800 |
3580 |
1210 |
2450 |
2200 |
2130 |
||
RCYD(C)-20 |
2000 |
550 |
350 |
500 |
7.5 |
9400 |
3800 |
1300 |
2700 |
2400 |
2410 |
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..Â
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact Information
Counter Flow Closed Cooling Tower
Let's look at the comparison of electric energy, electric energy is not different, because they are all through the same power equipment to operate the equipment, the power of the two is similar, the running time is the same, basically the energy consumption is about the same.
To sum up, for the Closed Cooling Tower energy saving accounting can be strong to open the tower out, and, today are advocating energy conservation and environmental protection, this is the general trend, so the closed cooling tower is more and more favored by the majority of users.
Counter Flow Closed Cooling Tower,Closed Type Cooling Tower,Cooling Tower Closed Loop System,Closed Circuit Cooling Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhouarkfluid.com