Model NO.: GL-II
Down-The-Hole Hammers: Middle-High-Pressure Air
Drill Head Lifting Force(Kn): 94.55
Feed Thrust (Kn): 0-12
Main Hoist Lifting Force (Kn): 18.54
Trademark: GLORYTEK
Transport Package: Standard Export Packing
Specification: SGS
Origin: China
Model NO.: GL-II
Down-The-Hole Hammers: Middle-High-Pressure Air
Drill Head Lifting Force(Kn): 94.55
Feed Thrust (Kn): 0-12
Main Hoist Lifting Force (Kn): 18.54
Trademark: GLORYTEK
Transport Package: Standard Export Packing
Specification: SGS
Origin: China
Main ApplicationDrilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells
| Item | GL -Â II Truck Mounted Drill |
| Hole Diameter (mm): | 90 - 1200 |
| Hole Depth (m): | 150 |
| Run of Rod (m): | 3 |
| Drill Rod Diameter (mm): | 60 \ 73 \ 89 \ 95 \ 133 |
| Drill Head Inside Diameter (mm): | 35 \ 60 \ 81 \ 120 |
| Rig Mass (kg): | 9100 |
| Drilling Technology : | Normaland Reverse Circulation for Both Mud and Air |
| Down-The-Hole Hammers: | Middle-High-Pressure Air |
| Drill Head Lifting Speed (m/s): | 0.25 0.15 |
| Drill Head Lifting Force(kN): | 94.55 |
| Feed Thrust (kN): | 0 - 12 |
| Drill Head Spin Speed (r/min) : | A(Forward:13-22-48, Reverse:10-17-36) |
| B(Forward: 48-84-184, Reverse: 37-65-142) | |
| Main Hoist Lifting Force (kN): | 18.54 |
| Mud Pump: | BW450 |
| Flow (L/min): | 450 350 |
| Pressure: (Mpa) | 1.2 2.0 |
| Power Unit: | Diesel Engine |
| Power(Kw): | 42 |
| Supporting Form | Hydraulic Unit |
| Mask Up-Down: | Hydraulic Unit |
| Chassis: | DONG FENG EQ1093(four-wheel drive) |
| Dimensions(mm): (L-W-H) | Working Conditions: 7900*2370*7200 |
| Transport status: 8450*2370*3400 |
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
Â
Â
Â
|
Products>>Â Â Â Â Â |
                                          Drilling equipments and Drilling tools |
| Drilling Rig | DTH drilling rig, Blasthole drill rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig, Anchor drilling rig, Rotary drilling rig, Auger drilling rig, CBM drilling rig etc. |
| Drillling Auxiliaries | DTH hammers, DTH bits, Downhole Motor, Pumps, Tricone bits, PDC Bits, Button Bits, Chisel Bits, Cross Bits, Drill pipe, Drill collars, Cutter Picks, etc. |
Â
  Â
Due to the continuous effort and improvement, Glorytek's market share keeps increasing rapidly, meanwhile, the perfect after-sales service is providing a strong support and guarantee for the expanding of business cooperation. Till now, we enjoy the good reputation and our products have been winning the confidence of a lot of domestic and overseas customers like Canada, Australia, Nigeria, Pakistan, Russia, Ethiopia, Indonesia, Malaysia, etc. more than 30 countries.
 Main Application
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells
| Item | GL -Â II Truck Mounted Drill |
| Hole Diameter (mm): | 90 - 1200 |
| Hole Depth (m): | 150 |
| Run of Rod (m): | 3 |
| Drill Rod Diameter (mm): | 60 \ 73 \ 89 \ 95 \ 133 |
| Drill Head Inside Diameter (mm): | 35 \ 60 \ 81 \ 120 |
| Rig Mass (kg): | 9100 |
| Drilling Technology : | Normaland Reverse Circulation for Both Mud and Air |
| Down-The-Hole Hammers: | Middle-High-Pressure Air |
| Drill Head Lifting Speed (m/s): | 0.25 0.15 |
| Drill Head Lifting Force(kN): | 94.55 |
| Feed Thrust (kN): | 0 - 12 |
| Drill Head Spin Speed (r/min) : | A(Forward:13-22-48, Reverse:10-17-36) |
| B(Forward: 48-84-184, Reverse: 37-65-142) | |
| Main Hoist Lifting Force (kN): | 18.54 |
| Mud Pump: | BW450 |
| Flow (L/min): | 450 350 |
| Pressure: (Mpa) | 1.2 2.0 |
| Power Unit: | Diesel Engine |
| Power(Kw): | 42 |
| Supporting Form | Hydraulic Unit |
| Mask Up-Down: | Hydraulic Unit |
| Chassis: | DONG FENG EQ1093(four-wheel drive) |
| Dimensions(mm): (L-W-H) | Working Conditions: 7900*2370*7200 |
| Transport status: 8450*2370*3400 |
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Â
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.
Â
Â
Â
|
Products>>Â Â Â Â Â |
                                          Drilling equipments and Drilling tools |
| Drilling Rig | DTH drilling rig, Blasthole drill rig, Water well drilling rig, Oil well drilling rig, Piling drilling rig, Anchor drilling rig, Rotary drilling rig, Auger drilling rig, CBM drilling rig etc. |
| Drillling Auxiliaries | DTH hammers, DTH bits, Downhole Motor, Pumps, Tricone bits, PDC Bits, Button Bits, Chisel Bits, Cross Bits, Drill pipe, Drill collars, Cutter Picks, etc. |
Â
  Â
Due to the continuous effort and improvement, Glorytek's market share keeps increasing rapidly, meanwhile, the perfect after-sales service is providing a strong support and guarantee for the expanding of business cooperation. Till now, we enjoy the good reputation and our products have been winning the confidence of a lot of domestic and overseas customers like Canada, Australia, Nigeria, Pakistan, Russia, Ethiopia, Indonesia, Malaysia, etc. more than 30 countries.
Â
Stainless steel investment castings are components manufactured through the investment casting process.
This process begins with a wax pattern created using a 3D CAD model. The wax pattern is then used to create a ceramic mold.
Lost Wax Aluminum Casting,Lost Wax Casting Aluminum,Lost Wax Metal Casting Process,Aluminium Lost Wax Casting
Wuxi Zhenzhe Electric Power Technology Co.,Ltd , https://www.zhenzhecasting.com