The new national standards "hydraulic oil", "industrial closed gear oil", "turbine oil" and "transformer oil" were successfully released and will be implemented on June 1, 2012. The four newly released national standards have been completed using international standards and combined with China's national conditions. The standard level has been significantly improved and it is internationally advanced. Among them, “Hydraulic Oilâ€, “Industrial Closed Gear Oil†and “Turbo Motor Oil†were revised to adopt the ISO standard, and “Transformer Oil†adopted the IEC standard, reflecting that the standard level of the lubricant industry in China is accelerating to international standards.
Compared with the previous edition standards, this release of the standard further emphasizes the use of the product performance, combined with the actual use of the customer's needs, add some test items, such as appearance, density and other physical and chemical indicators. At the same time, according to the technical development of machinery and equipment, in order to better achieve supporting applications, some brand-name products have been added, and the range of product selection has become more extensive. The new version of the standard will impose stricter requirements on the production enterprises, and the inspection of the products will be more stringent. Therefore, the revision of this standard, while raising the level of standards, pays more attention to product quality requirements and provides a strong guarantee for customer rights and interests.
It is understood that in the process of boosting China's lubricating oil standards in line with international standards, a group of domestic independent brands represented by Kunlun Lubricants has made indelible contributions relying on its strong scientific research capabilities. Take the variable pressure oil standard as an example, the quality standard of HVDC transmission transformer oil produced by CNPC Lubricating Oil Company has reached the advanced level of internationally renowned transformer manufacturer Nynas Company of Switzerland, and Siemens, ABB, etc. have been adopted. The assessment and certification of multinational transformer manufacturers have become the exclusive products designated for domestic ultra-high voltage power transmission projects and occupy more than 60% of the market share in the country. Leading technical standards not only ensure that Kunlun Lubricant Transformer Oil has a leading domestic and internationally advanced status, but also boosted the progress of China's national lubricants standards in line with international standards.
High Grade Acetic Gasket Maker
Feature:
This product is one kind of sulfur Silicone Sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Several machine waster water resistant, good elastic. Color: transparent, black, grey, blue, red.
Main Component:
α, ω-Dyhydroxyl Methyl Silicone
Scope of application:
This product is used for sealing of car, gear case of motor, fore-and-art board, water pump , plane flange, cover board of other machine equipment.
Using Method:
1.Cleaning up the surface with the cotton fabric, guarantees the surface not to have the dust, the greasy dirt, the rusty stain and so on.
2.In order to obtain good outward appearance, paste the temporary protection adhesive tape , near the place to be pasted after clean the surface, pull out after paste glue.
3. Pierce the seal with the cap, cover the mouth, cut bevel the tube mouth.
4. Spread the sealant evenly on the place which need to be sealed or bonded. The operation should be continuously, guarantee the sealant continuously squeeze out at cylinder shape, move the glue mouth evenly and slowly, prevent the form of bubble or hole is move too fast.
5.The sealant form shape at approximately 10 minutes, when assembly maintains the gasket thickness, fold gathers the curing at normal temperature 24 hours.
Warning:
1. This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2. Do not put within kid`s reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3. When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4,After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5,This product should be operated at temperature 5-40℃,relative humidity 40-80%
Gasket Sealer,Acetic Gasket Maker,Instant Gasket Sealant,Sealing Adhesives Cream
Hunan Magpow Adhesive Group co.,ltd , https://www.magicglue.net