Floating Rubber Fender, Pneumatic Marine Rubber Fender

Model NO.: pneumatic fender
Length: From1m to 12m
Part: Fender, Bumper
Service Life: 10-20years
Certification: BV, ISO9001, CCS, ISO17357, ABS, Dnv, Lr
Engine Type: Outboard
Capability: Water Rubber Hose
Load Capacity: >8000teu
Usage: Trade, Ship Launching, Protection, Ship Docking
Trademark: AOHAI RMS WHALE
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
50KPA chain-net type Pneumatic Rubber Fender, Marine Pneumatic rubber fender with Certification
 
Name: Pneumatic Rubber Fender
Standard ISO 17357
Inner pressure  50KPA 80KPA other can be supplied as required
Type sling type defense type chain-net type
Certification IACS KR LR BV NK ABS DNV CCS...
Function ship to ship
Surface Black painted or as required
Material Natural Rubber
Diameter 0.5~4.5M
Length 1.0M~9.0M



Pneumatic Rubber Fender

(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Aohai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.

(2) Ultra low back pressure
The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.

(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of sea inflatable fender, its adaptability is much higher than other fender.

(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.

(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
 


Fender performance specification  
 
Size  Initial internal pressure Guaranteed energy absorption
                 GEA(kJ)
Reaction force at GEA deflection
                       R((kN))
D×L(m) (Kpa) Minimum value at deflection
60±5%
Tolerance ±10%
0.5×1.0 50 6 64
0.6×1.0 50 8 74
0.7×1.5 50 17 137
1.0×1.5 50 32 182
1.0×2.0 50 45 257
1.2×2.0 50 63 297
1.35×2.5 50 102 427
1.5×3.0 50 153 597
1.7×3.0 50 191 639
2.0×3.5 50 308 875
2.5×4.0 50 663 1381
2.5×5.5 50 943 2019
3.0×5.0 50 1210 2104
3.0×6.0 50 1485 2583
3.3×4.5 50 1175 1884
3.3×6.0 50 1675 2783
3.3×6.5 50 1814 3015
3.3×10.6 50 3067 5257
4.5×9.0 50 4752 5747
4.5×12.0 50 6473 7984




About Us


Aohai Marine Fittings Co., Ltd belong to Aoahai Group, is invested by Aohai Anchor Chain Factory, total investment is over $180 million. We supply products for Offshore Project, Quay Construction and Shipbuilding Industry. We currently have more than 600 stuff, including 75 engineers and management, 25 international trade personal, 19 QA engineers.

Our main production equipment include 5# , 7#, 9#, 11# chain manufacturing machine,
automation anchor manufacturing machine,
steel mooring buoy manufacturing production line,
3 sets of rubber fender production line, heat treatment machine,
load test machine and shot blasting machine.

Meanwhile, we are sales representative of other big factories, products mainly include Pneumatic Rubber Fenders, Marine Mooring Ropes, Deck Out-fittings and Steel Wire Ropes.

We are ISO9001 Quality Control System approval, and approved by ABS, BV, LR, DNV, GL, NK, KR, CCS, RINA and other IACS class societies.

Floating Rubber Fender, Pneumatic Marine Rubber Fender
Floating Rubber Fender, Pneumatic Marine Rubber Fender
Floating Rubber Fender, Pneumatic Marine Rubber Fender
Floating Rubber Fender, Pneumatic Marine Rubber Fender
Floating Rubber Fender, Pneumatic Marine Rubber Fender
Floating Rubber Fender, Pneumatic Marine Rubber Fender




Any inquiry please contact:
Kelly
Mobile: +86-17753210369
 
 
 
Website: www.anchorchaincn.com / www.aohaimarine.com

 

Reducer-Gearbox-Fan-Heater

JT SCREW, having over 20 years experience, located in Zhoushan city 1 hour next to Ningbo port, is one of the biggest professional manufacturers for Plasticating Components. Based on our Reliable Quality and Competitive Pricing, we are considered one of the leading Manufacturers and Rebuilders of Feed Screws and Barrels in the Country. At JT SCREW, we offer a whole array of Materials and Designs depending on particular processing applications. Our Sales Team will help you in making those critical decisions on how to enhance your processing performance. Due to our high-quality products and outstanding customer service, we have gained a global sales network reaching America, Germany, Brazil, Russia, Ukraine, India, Pakistan, and some other countries and regions. Welcome any of your inquiries about the goods you are interested in. Also, we appreciate any of your suggestions and comments on our service and quality.

Reducer-Gearbox-Fan-Heater,Fan Heater Barrel Heater,Twin Screw Hard Teeth Surface Gearbox,Twin Screw Gearbox

Zhejiang Jinteng Machinery Manufacture Co., Ltd. , https://www.jintengmachine.com