Five new measures for vehicle management to launch a new car without security

The reporter learned from the Ministry of Public Security on the 25th that the Ministry of Public Security and the Ministry of Industry and Information Technology have jointly issued the "Notice on Further Strengthening the Conformity Supervision and Registration of Road Motor Vehicle Production" (hereinafter referred to as the "Notice"). Five new initiatives.

1 No more security before car registration

The "Notice" requires that: First, as of October 1, 2010, all car products that pass the factory inspection must not be subjected to motor vehicle safety inspection prior to registration; the second is approved by the Ministry of Industry and Information Technology. Other small and micro passenger cars and two-wheeled motorcycles produced by enterprises with production consistency assurance capabilities do not require motor vehicle safety inspections.

The person in charge of the Traffic Management Bureau of the Ministry of Public Security stated that this will reduce the cost of pre-registration vehicle inspections, and no safety technical inspections will be required before registration of all cars.

2 The extension number of the vehicle is assigned by the manufacturer

The "Notice" stipulates that from January 1, 2011, vehicle (not including three-wheeled vehicles and low-speed trucks) and semi-trailer manufacturers will be required to dispatch real-vehicle vehicle identification code rubbing film to the vehicle manufacturer. When registering, there is no need to reprint the vehicle identification code, which will save money.

In addition, the "Notice" stipulates that since January 1, 2011, manufacturers of automobiles (excluding three-wheeled vehicles and low-speed trucks) and semi-trailers will be dispatched with real-vehicle photographs of motor vehicle exterior color photographs. When registering at the vehicle management office, there is no need to shoot or make photos. It is reported that these two measures will reduce the registration time for vehicles by about 20 minutes. The registration time for an exempt vehicle will be reduced to within half an hour.

3 Two regular notifications of violations

The registration of registration of motor vehicles by local traffic administrative departments shall not be included in the "Announcements" or exceed the validity period of the "Announcements" when they are not registered as required, or the technical parameters of the vehicles do not conform to the relevant national standards, or the technical parameters and photos of the vehicles are inconsistent with the "Announcement", or Products whose vehicle identification code is inconsistent with the actual vehicle shall not be registered and reported to the Ministry of Public Security. The Ministry of Public Security regularly informs the Ministry of Industry and Information Technology. The Ministry of Industry and Information Technology processed the feedback to the Ministry of Public Security. The two departments regularly publish the illegal vehicle production enterprises and products.

4 Sleeper Buses Improve Equipment Standards

In recent years, the safety of sleeper buses has been prominent and there have been many cases of serious accidents. The "Notice" requires that from January 1, 2011, the newly declared "Stop" sleeper bus products should be equipped with retarders, speed limit devices, anti-lock braking systems, and car driving recorders that meet the standards. For the load-bearing frame structure, all the wheels are tireless radial tires, and the front brake system should be equipped with disc brakes, and the rear passenger car engine products should also be equipped with automatic engine compartment fire extinguishing devices. In addition, the new factory long-distance passenger coaches and tourist coaches must be equipped with vehicle driving recorders as required.

5 Recent inspections of heavy trucks

"Notice" requirements: First, the cargo part of trucks and semi-trailers shall not be designed as a retractable structure; the external dimensions of cars, trailers, and formed car trains must comply with the "Axial Loads, Dimensions and Quality Limits of Road Vehicles" "(GB1589) regulations.

Second, vehicle manufacturers must strictly follow the "announcement" approved production of vehicle products, complete the complete vehicle manufacturing process. The side and rear lower protection devices, truck compartments, various types of tanks, body reflective signs, and triangle warning signs commissioned for processing or procurement must be assembled and configured as required before leaving the factory.

It is reported that the Ministry of Industry and Information Technology and the Ministry of Public Security will focus on supervising and inspecting large and medium-sized buses and heavy-duty trucks in the near future.

Sealed Nylon Cage Bearing is one type of Deep Groove Ball Bearing with unique nylon cage. It is often used in the mine. has better anti-stuck performance and wider range of temperature than iron cage. In the underground its anti-static performance is also better. It is best cost-effective Bearing For Idler roller. 

 

The selection of sealed nylon cage is crucial to KA bearing with one or double seals, while the material of nylon cage must be pure and has enough toughness and strength, because the cage will get very soft if it is made of bad material or mixed material, thus to make no anti-stuck performance within the bearing. To get safety certificate for coal mining products must use nylon cage bearing.


sealed Nylon Cage Bearing

Special: Our KA(Nylon retainer) series bearings Obtained MA certification, safety certificate of approval for mining products (rollers) in China. With good performance of anti-seize and anti-static.


Sealed Nylon Cage Bearing

Feature Of Our Nylon Retainer:

1. reinforced nylon retainer, it has good low noise properties and better sliding

characteristics

2. very good corrosion resistance

3. a wide temperature range

4. Product tested by National Coal Science Institute and Provincial Quality Inspection

Center. mine standard in China.

5. Good toughness and strength, good anti-seize performance, constantly used in dusty environment and underground environment.

 

Main Products:

Open Nylon Cage Bearing

To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.

 

Sealed Nylon Cage Bearing

Sealed Nylon Cage Bearing,Cheap Sealed Nylon Cage Bearing,Sealed Polyamide Cage Bearing

Shandong Xinkaite Bearing Co., Ltd. , http://www.conveyorbearing.com