Model NO.: SKC
Movement Way: Fixed
Type of Flow: Parallel Flow
Type of Atomization: Gas Atomization
Sprayer: Air-Flowing Type
Material: Q235B Carbon Steel Plate or as Client Requirement
Installation: Supplier Dispatch Engineer
Voltage: 380 V Others
Power(W): 5.5-110 Kw
Dimension(L*W*H): Different Model Different
Weight: 6- 300 Ton
Certification: CE, ISO9001:2000
Warranty: Two Years
Application: Construction,Metallurgical,Mining Industry etc
Drying Temperature: 200-1000 Degree
Trademark: KZ
Specification: CE, ISO
Origin: Zhengzhou, China
HS Code: 8419399090
  Energy saving cassava dregs dryer/cassava dregs drying equipment with large capacityWorking Principle Of cassava dregs Dryer:
1.The cassava dregs from cassava dregs dryer was sent to hopper by belt
conveyor or bucket elevator and then by the feeding machine of hopper through
charging pipe into the feeding side.
2.The slope of feeding pipeline from cassava dregs dryer should bigger than the
materials' natural dip angle, in order to raw material smoothly flow into the dryer
machine.
4.During the moving process of cassava dregs drying system, wet materials in the
cylinder directly or indirectly got heat from the heating body, make wet materials to dry, then in the discharging end the materials were sent out by belt conveyor or
screw conveyor.
cassava dregs Dryer Advantages:
1.This cassava dregs drying system with high degree of mechanization, large
production capacity, and continuous option.
2.Also this drying system with simple and excellent structure, material running
smoothly through the cylinder, operating convenience.
3.Less mechanical failure, low maintain charge, and low power consumption
4.Uniformity of drying product is good
Main technical parameters of cassava dregs dryer machine:
 Â
| Model | Diameter (m) |
Length (m) |
speed (r/min) |
Installation obliquity (%) |
Drying temperature (°c) |
Capacity (t/h) |
Motor (kw) |
Weight (ton) |
| Φ0.8x8 | 0.8 | 8 | 3-6 | 3-5% | ≥800 | 0.6-0.8 | 3 | 3.5 |
| Φ1.0x10 | 1.0 | 10 | 3-6 | 3-5% | ≥800 | 1-1.5 | 4 | 7 |
| Φ1.0x12 | 1.0 | 12 | 3-6 | 3-5% | ≥800 | 1.5-1.8 | 4 | 8 |
| Φ1.0x15 | 1.0 | 15 | 3-6 | 3-5% | ≥800 | 1.5-2 | 5.5 | 10 |
| Φ1.2x10 | 1.2 | 10 | 3-6 | 3-5% | ≥800 | 1.8-2 | 7.5 | 14 |
| Φ1.2x12 | 1.2 | 12 | 3-6 | 3-5% | ≥800 | 2-3 | 11 | 15 |
| Φ1.2x15 | 1.2 | 15 | 3-6 | 3-5% | ≥800 | 2.5-3 | 11 | 18 |
| Φ1.5x15 | 1.5 | 15 | 3-6 | 3-5% | ≥800 | 3-3.5 | 15 | 20 |
| Φ1.5x18 | 1.5 | 18 | 3-6 | 3-5% | ≥800 | 3.5-4 | 15 | 23.5 |
| Φ1.5x20 | 1.5 | 20 | 3-6 | 3-5% | ≥800 | 4.0-4.5 | 15 | 25 |
| Φ1.8x15 | 1.8 | 15 | 3-6 | 3-5% | ≥800 | 4.5-5.0 | 18,5 | 28 |
| Φ1.8x18 | 1.8 | 18 | 3-6 | 3-5% | ≥800 | 5.0-5.5 | 18.5 | 30 |
| Φ1.8x20 | 1.8 | 20 | 3-6 | 3-5% | ≥800 | 5.5 | 18.5 | 33 |
| Φ2.0x15 | 2.0 | 15 | 3-6 | 3-5% | ≥800 | 5.5-6 | 18.5 | 35 |
| Φ2.0x18 | 2.0 | 18 | 3-6 | 3-5% | ≥800 | 6-6.5 | 18.5 | 42 |
| Φ2.0x20 | 2.0 | 20 | 3-6 | 3-5% | ≥800 | 6.5-6.8 | 18.5 | 50 |
| Φ2.2x20 | 2.2 | 20 | 3-6 | 3-5% | ≥800 | 6.5-7.0 | 22 | 56 |
| Φ2.2x22 | 2.2 | 22 | 3-6 | 3-5% | ≥800 | 7.0-7.5 | 22 | 58 |
| Φ2.4x20 | 2.4 | 20 | 3-6 | 3-5% | ≥800 | 7.5-8 | 30 | 60 |
| Φ2.5x20 | 2.5 | 20 | 3-5 | 3-5% | ≥800 | 8-9 | 30 | 63 |
| Φ2.5x25 | 2.5 | 25 | 3-5 | 3-5% | ≥800 | 10-11 | 37 | 68 |
| Φ2.6x20 | 2.6 | 20 | 3-5 | 3-5% | ≥800 | 9-10 | 37 | 65 |
| Φ2.6x25 | 2.6 | 25 | 3-5 | 3-5% | ≥800 | 11-12 | 37 | 73 |
| Φ2.6x30 | 2.6 | 30 | 3-5 | 3-5% | ≥800 | 15-18 | 45 | 80 |
| Φ2.8x20 | 2.8 | 20 | 3-5 | 3-5% | ≥800 | 13-15 | 45 | 75 |
| Φ2.8x22 | 2.8 | 22 | 3-5 | 3-5% | ≥800 | 15-16 | 45 | 78 |
| Φ2.8x30 | 2.8 | 30 | 3-5 | 3-5% | ≥800 | 18-20 | 55 | 83 |
| Φ3.0x20 | 3.0 | 20 | 3-5 | 3-5% | ≥800 | 18-20 | 55 | 78 |
| Φ3.0x22 | 3.0 | 22 | 3-5 | 3-5% | ≥800 | 20-25 | 55 | 80 |
| Φ3.0x30 | 3.0 | 30 | 3-5 | 3-5% | ≥800 | 25-28 | 75 | 90 |
Adjust Breaker Hammer,Adjust Breaker Hammer Excavator,Spare Parts For Breaker Adjust ,Excavator Mounted BreakerAdjust Breaker Hammer,Adjust Breaker Hammer Excavator,Spare Parts For Breaker Adjust ,Excavator Mounted Breaker
JO EE IMPORT & EXPORT TRADING CO, LTD , https://www.joeechina.com