According to Bridgestone News, as its flagship brand for “ green tires †environmental protection, sales of “ green song partners †in the Chinese market have now exceeded one million.
In March 2010, the "green song partner" was the first flagship product to introduce the Chinese market to EP100A. Thanks to the "ECOPIA compound" technology, which is a special modified polymer and carbonized product, this product achieves a 20% to 25% improvement in tire rolling resistance, taking into account product safety and environmental protection (energy saving and fuel saving). .
In recent years, with the deteriorating global environment, more and more families and individuals have begun to pay attention to the environmental protection details around them. As the only carrier for the contact between the car and the ground, the tire becomes an important environmental factor that cannot be ignored.
According to reports, the "green song partner" low rolling resistance technology, to ensure its energy-saving and environmental protection characteristics, taking into account the safety advantages of wet road braking, but also allow it to be widely concerned about in the industry. According to industry sources, the popularity of the tire brand in the market has witnessed the increasing awareness of the public's environmental awareness.
In 2012, with the launch of the first green tire SUV EP850 in the Chinese market, the first green song companion R102 for China's commercial vehicle sector was launched, and its product line in the Chinese market was getting more and more. rich.
Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.
Wear ring for excavator,For excavator track,For excavator accessories
Safe Seal Technology Co., Ltd. , https://www.jolseals.com